artificial grass in california

A clear understanding of specifications is key to making an informed decision. Below is a detailed breakdown of the 7016 model’s parameters.

Step-by-Step Guide: Paving and Installation Process

Correct installation is very important for achieving the best performance and life of artificial sports lawn. There is a standardized process.

• Site Preparation & Base Hardening: The foundation must be solid, stable, and well-draining. Suitable base courses include compacted stone, concrete or asphalt. The surface must be smooth and level. Crucially, paving the road is directly carried out on the hardened ground. If the site has not been hardened, you must complete this step first.
• Unwinding and Positioning: Transport a large piece of turf rolls to the designated area. Spread the turf, let it adapt to the climate and flatten it. Before final positioning, confirm the direction of the turf fibers. In order to obtain the most uniform appearance, all the components should be oriented in such a way that when viewed from the main entrance or playing direction, the grass fibers face away from the viewer to minimize light reflection.
• Seaming and Adhesion: For joining multiple rolls, use specialized seam tape and outdoor-grade artificial turf adhesive. Apply adhesive along the middle seam area and on the seam tape. Wait for it to become sticky (slightly dry). Carefully align the two turf pieces, ensuring the fibers lie in the same direction, and press the edges onto the tape. Apply a second layer of adhesive to the top of the joint tape until it becomes sticky, and then press down the edge of the turf hard.
• Final details and Compaction: Once the adhesive is almost solidified, check the joints by hand or with a heavy roller to ensure a firm and invisible bond. Clean the whole surface with an electric brush or a hard broom, and lift the fibers to obtain a uniform and upright appearance. Check the whole area for flaws.