You may want to attach artificial grass to concrete for many reasons, with beauty being one of the first items on the list. If your concrete has become worn, chipped, or cracked, installing artificial turf is an inexpensive way to update your space. It also offers a safe alternative to concrete because of its anti-slip surface. Tools and materials to have on hand are as follows.
Tools Needed:
- Tape Measure
- Turf Glue
- Seam Tape
- Utility Knife or Turf Cutter
- Garden Hose
- Putty Knife
- Plastic Rake or Power Broom
- Power Drill
- 16 mm Drill Bit
Materials Needed:
- Artificial Turf
- Foam Underlay
- Turf Infill
- 10 mm Shingle
- Self-levelling Compound (for minor cracks in concrete)
Preparing the Surface
Like installing over wood, the first step is cleaning the concrete thoroughly. You can choose a cleaner that is designed specifically for cleaning concrete. Use a power broom or push broom to scrub stains, mold, or other debris from the surface.
Pay attention to drainage. If you see puddling on the concrete, you may need to drill drainage holes to avoid pooling. Fill the gaps with 10 mm shingle.
Use a self-leveling compound to repair small cracks if there are uneven surfaces.
Let the concrete dry completely before installing the foam underlay. Lay out the foam underlay and cut it to fit. The foam comes in rolls and sometimes tends to roll up so weigh it down to keep it in place. Use some masking tape to hold the pieces in order until glued down. Follow the manufacturer’s instructions for using the glue, ensuring all areas are covered thoroughly.
Anchor the Artificial Grass
You can next cut the turf to size, always cutting from the underside of the artificial grass. Use seam tape and turf glue at joins just like you would if the surface were wooden. Glue the perimeter of each grass piece in place.
Once the glue has completely cured, apply infill on top of the grass. Apply per package directions to weigh down the grass.
Leave a Reply