Some people apply turf to wood surfaces such as floors and decks. The installation is different since there is no soil to prepare. Anchoring your artificial grass to wood can be done. As an added advantage, anchoring turf to wood is more straightforward than anchoring it to soil.
Tools Needed:
- Utility Knife
- Turf Adhesive
- Deck Cleaner
- Garden Hose
- Scrub Brush
- Measuring Tape
- Trowel
- Seam Tape
- Weighted Lawn Roller
- Chalk
Materials Needed:
- Artificial Grass
- Foam Underlay
- Infill
Preparing the Surface
The most important part of anchoring your artificial grass to a wooden surface is cleaning it. Use a deck cleaner and scrub brush to clean it of grease, dirt, mildew, or pollen thoroughly. Ensure the solution is rinsed well after scrubbing, and let it thoroughly dry before you start installing. We recommend at least 48 hours before you begin the installation.
Once your surface is clean and thoroughly dry, measure out how much of the artificial grass roll is required to fully cover the wood. Roll your top turf pieces into the desired position, ensuring the grass fibers face the same direction. Mark the base where two strips join so you know where to apply glue. Then, cut the perimeter of your grass to fit your space.
Attach the turf
Peel back the first piece of turf and apply glue to the perimeter of each piece of turf.
Ensure the joins are hidden by cutting S-seams rather than straight lines. Then, apply seam tape and turf glue to joins the same way you would when installing artificial turf on soil. The only difference is that you won’t use nails on wood.
Once you have glued the turf to the wood surface, use a weighted lawn roller to be sure that it is stuck down in all places. Refrain from walking on the surface for at least a day to allow the glue to dry and set. Then, add infill and brush.
Leave a Reply